Chimney Cleaning Service in Spokane, WA
Live Clean Today is the chimney sweep Spokane homeowners call for inspection, mechanical brushing, HEPA vacuum extraction, and a written condition report. We provide chimney cleaning Spokane, Spokane Valley, and Liberty Lake residents can book year-round, with most single-appliance visits done in under two hours and floors and furniture protected the entire time.
Creosote and soot build up with every fire, and Eastern Washington’s long heating season means Spokane fireplaces log more hours than most. Left alone, that buildup turns from an efficiency problem into a fire and carbon-monoxide hazard. Professional chimney cleaning isn’t just upkeep — annual chimney cleaning before the season starts is the difference between routine maintenance and an emergency call. Every technician follows the same checklist on every job, whether it’s a single wood stove flue or a multi-fireplace home, so the process is consistent no matter which crew shows up.
Signs Your Chimney Needs Cleaning — and What Happens If You Skip It
Chimney problems build gradually and rarely show from the outside. Watch for:
- A creosote layer of 1/8 inch or more on the interior walls
- Black, flaky soot on the damper or firebox floor
- A campfire smell that lingers even when the fireplace is cold
- Smoke drifting into the room instead of up the chimney
- Weak, sluggish draft or slow-burning fires
- Scratching or nesting sounds inside the flue
Wet firewood and cold Eastern Washington nights speed up buildup, so a system that seemed fine last spring can be well past due by fall. Left unaddressed, that buildup creates two separate risks: a chimney fire, where creosote ignites at high heat and can damage the liner and surrounding masonry, and carbon monoxide backdraft, where blocked airflow pushes exhaust gases back into the house instead of up and out.
Both are preventable with annual cleaning, and both are expensive after the fact — masonry repair and relining cost far more than a routine sweep.
On top of the safety issue, a partially blocked system also makes your fireplace or stove work harder for less heat, which shows up as wasted firewood or pellets over a full season. One more reason not to skip it: without records of regular cleaning, an insurer can question a claim after a chimney fire.
Chimneys and gutters face the same seasonal pressure from leaves and winter ice, so pairing your chimney sweep with gutter cleaning covers the whole roofline in one visit.
What Our Chimney Cleaning Service Includes
Every visit covers the full scope of work a chimney needs, not just a quick brush pass:
- Initial inspection of the flue, firebox, and visible chimney structure
- Floor and furniture protection before any work starts
- Mechanical rotary brushing along the full interior length
- HEPA vacuum extraction so loosened soot and debris never enter the room
- Chimney cap and crown check for blockages, damage, or missing parts
- Final draft test to confirm proper airflow before we call it done
- A written condition report flagging anything that needs attention
- While we’re up there for the cap and crown check, we’ll also flag any moss or algae buildup we notice on the surrounding shingles — a good moment to ask about roof cleaning if it’s overdue too.
Here’s how a typical visit runs, start to finish:
Inspection — we assess the chimney structure and firebox before quoting the job.
Protection — floor coverings and fireplace sealing go up first.
Rotary brushing — a mechanical brush clears buildup from top to bottom.
HEPA extraction — a high-efficiency vacuum captures everything loosened in step three.
Cap, crown, and damper check — we look for blockages or damage at the top of the system.
Draft test — we confirm the chimney draws properly before finishing.
Report — you get a written summary of what we found, not just a verbal “all good.”
Most single-appliance chimney sweep visits take 45 to 90 minutes; a system that hasn’t been serviced in years may take longer. And no, you won’t be left with a mess — the HEPA extraction step is what keeps soot out of your living room.
Wood Stoves, Pellet Stoves and Gas Fireplaces
Every appliance builds up differently, so fireplace cleaning isn’t one-size-fits-all, and neither is stove service.
- Wood-burning fireplaces and wood stoves are the biggest creosote producers of the three. Wet or unseasoned wood — common in Eastern Washington winters — can leave a dangerous glaze in a single season, which is why annual wood stove cleaning, or more often with daily use, matters most here.
- Creosote removal on these systems is the single biggest fire-risk reduction we offer.
Pellet stoves produce far less creosote, but ash accumulates in the vent, burn pot, and exhaust fan instead. Both the venting and the appliance itself need attention, typically once a year or after burning roughly a ton of pellets. - Gas fireplaces and gas inserts don’t produce creosote at all, but debris, rust, and bird nests can still block the vent and push carbon monoxide back into the house. An annual vent check is the minimum safety step even for a gas system.
Rave reviews are officially in for Live Clean Today
As they say, talk is cheap – results are everything. And positive results are exactly what we strive for with every one of our clients here at Live Clean Today. But don’t take our word for it. Be sure to read through many of the glowing reviews and feedback we’ve received from our customers…
Chimney Cleaning Before Selling or Buying a Home
Real estate deals involving a fireplace almost always come with a chimney inspection question. A Level 2 inspection covers what most transactions require — attic, crawlspace, roof, and a flue camera scan — and the written report you get afterward can go straight into the closing paperwork.
Sellers who schedule a chimney sweep and inspection before listing avoid last-minute surprises that stall closing; buyers get confirmation the fireplace is safe to use from day one.
Book two to three weeks before your target closing date so scheduling isn’t the thing holding up the sale — inspection reports have a shelf life for lenders and agents alike, and a report from months earlier may need to be redone. Cracked crowns, missing caps, and aging liners are the most common findings at this stage — better to know before an offer than after.
Why Homeowners in Spokane Trust Our Chimney Cleaning Company?
Choosing the right chimney cleaning company matters, especially when fire safety is on the line. Live Clean Today has been the chimney sweep Spokane turns to since 2008. When you work with us, you get:
- Thorough cleaning with professional-grade rotary and HEPA equipment
- Careful protection of floors and furniture during every visit
- An honest condition report — no pressure to buy work you don’t need
- Clear communication before, during, and after the appointment
A clean chimney lowers fire risk, improves draft, and helps your heating system run efficiently through a long Spokane winter. We don’t upsell repairs a chimney doesn’t need, and if something does need attention, we explain what it is and why — in plain language, not a scare tactic to close a sale. Schedule your chimney sweep before the heating season starts rather than after the first cold snap.
Licensed, Insured & Committed to Your Safety
As a licensed and insured chimney cleaning crew, we take the safety of your home seriously — every visit is covered from start to finish. Before we pack up, we walk through the work with you so anything that needs attention gets handled immediately. Notice something later? Reach out within 24 hours and we’ll return to fix whatever was part of the agreed service, free of charge.
Chimney Cleaning Services — Areas We Serve in Spokane
Live Clean Today handles chimney sweep Spokane and inspection work throughout Spokane County and North Idaho, with no travel surcharge inside our regular service area — a two-story home in Spokane Valley gets the same visit as a single-story house downtown.
We regularly serve Spokane (99201–99224), Spokane Valley (99206, 99212, 99216), Liberty Lake (99019), Post Falls, ID (83854), Coeur d’Alene, ID (83814, 83815), Bellevue (99205), Colbert (99005), Fairwood (99208, 99218), Millwood (99212), Newman Lake (99025), and Nine Mile Falls (99026). Homes running a fireplace as a primary heat source in any of these areas typically need a chimney sweep every year rather than every other.
Have a fireplace that hasn’t been cleaned in a while? Get in touch before the cold season arrives — we’ll make sure your chimney is ready.
